Wangda Showcases won the museum display cases tender for Gulin Museum

Wangda Showcases won the museum display cases tender for Gulin Museum which is situated in the West Mountain Park in Guilin City of Guangxi Zhuang Autonomous Region.The Guilin Museum was prepared ........

Boasting a collection of 21,500

Wangda Showcases Won the museum display cases project of Linhai City Museum

Linhai Museum is a synthetic local museum that stores the largest sum of relics in Taizhou. Independently organized in September 1980 with 9 conservators, it occupies 3,500 square meters in all. .........https://www.wangdashowcases.com

High-end museum display cases by Wangda Showcases begin to serve High Court of Beijing

After the on-site installation being ended,the tailored high-end museum display cases(display cabinets,showcases,virines) by Wangda Showcases for Beijing High Court has been put into official operation in the gallery to carry on its task to preserve and display the related judiciary exhibits.For more detais, please visit : http://www.tjwangda.com/en/htmls/newslist/list-6-1.html

WANGDA WON THE BIGGEST TENDER LOT OF CHUNG TAI WORLD MUSEUM PROJECT

CHUNG TAI WORLD MUSEUM is the largest buddhism museum in the world.Tianjin Wangda successfully won the biggest tender lot through public,equal, and just competitive negotiation and after field visits at all the worldwide showcase supplier candidates by the experts and consultants from the museum.Wangda design,manfacture and install all the high-end museum display cases for the galleries for 2 floors.

The landscape of the museum covers an area of 9 hectares, with a floor space that spans over 66,000 square meters. The external design of the buildin is identical to the ancient city in Tang Dynasty (618-907AD). Amalgamating Chinese architecture with Western techniques, Chung Tai World Museum echoes this notion: Both Buddhism and traditional Chinese culture bear a long history but remain fresh in its essence.

The exhibition in Chung Tai Wolrd Museum will be grouped into three major themes: a) Stele Rubbings Exhibition b) Stone Sutra Exhibition c) Buddhism Cultural Relics Exhibition. The Buddhism Cultural Relics section will be further divided into four parts: large Buddhist statues, steles, small Buddhist statues and traditional stone carvings.

National Ceramics Museum of China Opens on Oct.18,2015

National Ceramics Museum of China,a world-class special museum for ceramics opens on Oct.18,2015.Located at Jingdezhen City which is well known as the "Porcelain Capital" because it has been producing pottery for over 1,700 years. WANGDA undertakes design,manufacturing and installation for all the high-end museum display cases for all the gallerires for China Ceramics Museum. The renovated China Ceramics Museum now covers an area of 83,000 square meters.Inside the museum are a compound of ancient kiln buildings and a compound of dwelling houses of the Qing Dynasty (1644-1911). In the ancient kiln workshop, workers can be seen giving technical performances of making ceramics manually to make copies of ancient porcelain. In the dwelling houses of the Qing Dynasty there is an exhibition of the ceramic development history of Jingdezhen and an exhibition of calligraphies and paintings. In the building of folk customs,there is a folk custom exhibition showing the Jingdezhen porcelain industry. The museum has collected over 5,000 items of historical relics.Around 100 items are Class One relics,most of which are products of government porcelain kilns, the porcelains left from the Yuan Dynasty (1271-1368) and the samples showing the processing technique of the celadon of the Yuan Dynasty. The celadon pillow with the pattern of dragon and tiger left from the Song Dynasty (960-1279) combines the technique of piercing and picking-up; the celadon vase with the pattern of plums left from the Yuan Dynasty is one of the best among the celadon products left from the Yuan Dynasty; and the celadon big plate, 72 cm in diameter, with the pattern of a sea animal, is a special product produced from the imperial porcelain kiln at that time. The museum also has an exhibition hall of the former kiln site at Hutian, which is affiliated to Pintaozhai (a room for evaluating ceramics), specializing in the study of ancient porcelains.

Custom-made / Bespoke Display Case from Wangda Showcases Limited

Special museum display cases can be custom-made on request according to special exhibits or special exhibition.Immense size,abnormal shape like column,trapezoid shape or particular function like zero oxygen environment of museum display cases can all be customized.No any compromise on the security,stability and airtightness come to special display cases. Glass Panels--- For special museum display cases,the glass panels are still made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.Frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 is usually proposed or 6+1.52+6 or 8+1.52+8 for larger sizes of display cases.. Construction Support--- Same as standard museum display cases,the metal profile of modular display cases to receive glass panels is still made by dedicated powder-coated aluminum extrusions and then tightly secured to structural steel skeleton that is made by mild/low carbon steel and powder-coated for finish. Inner Invironment--- As inert materials are comprehensively applied for making special museum display cases,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF for structural backboard and dressing baseboard are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For custom-made special museum display cases,there are usually 2 shelving systems for options,i.e.fabric-dressed ZF-MDF baseboards or powder-coated steel decks to work as shelving platform,or come with a pending glass shelving system with tempered/toughened glass shelves.For glass shelving system,the glass shevles are movable so as to freely adjust the shelving height.

Opening Solution--- Swing opening to achieve max. 90° access through dedicated hinge mechanism or pull and slide opening solution through the sliding mechanism are also usually proposed to use for special design of museum display cases. Air Tightness--- For special construction display cases,airtightness still keeps minimal same as standard museum display cases.Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,special museum display cases can be discretely and invisibly equipped with passive microclimate control systems under baseboards or much more precision of electronic active microclimate units. Lighting System--- Lighting system for special tailored museum display cases should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.to achieve Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level Lock System--- As the lock system with the highest level of security,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced

Modular Display Cases from Wangda Showcases

Specially tailored to meet travelling exhibition or the exhibition that need to change exhibits frequently,modular museum display cases can serve as an individual display system and also can be combined together from four directions to change into new structure shape of display cases so as to get larger and special-shape display space.No any compromise on the security,stability and airtightness come to this design. Glass Panels--- For modular museum display cases,the glass panels are still made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.Frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 is usually proposed. Construction Support--- Same as standard museum display cases,the metal profile of modular display cases to receive glass panels is still made by dedicated powder-coated aluminum extrusions and then tightly secured to lower steel structure that is made of mild/low carbon steel in powder-coating finish. Inner Invironment--- As inert materials are comprehensively applied for making modular museum display cases,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that powder-coated steel baseboard or ZF-MDF for dressing baseboard is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For modular display display cases,there are usually 2 shelving systems for options,i.e.fabric-dressed ZF-MDF baseboards or powder-coated steel decks to work as shelving platform,or come with a pending glass shelving system with tempered/toughened glass shelves.For glass shelving system,the glass shevles are movable so as to freely adjust the shelving height.

Opening Solution--- Swing opening to achieve more than 90° access through dedicated hinge mechanism is usual for modular museum display cases.Pull and slide opening solution through the sliding mechanism can also be applied for this design. Air Tightness--- No any compromise on airtightness for modular museum display cases.Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,modular museum display cases can also be discretely and invisibly equipped with passive microclimate control systems under baseboards. Lighting System--- Lighting system for modular museum display cases should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed. Lock System--- As the lock system with the highest level of security,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced

Drawer Table Case / Cabinet Case from Wangda Showcases Limited

Museum table display case of drawer design/display cabinet is a combination of standard table display cases and drawer units.A full-vision glass hood with glazed panels for all sides supplies all direction display and lower drawer units with clear glass top supplies perfect storage and high density display.The combination is applicable to the batch exhibition of small,thin and flat artifacts such as jewelry,documents,coins,medals,manuscript,calligraphy and so on. Glass Panels--- Glass hood for museum display cases of table design is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood and drawer cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option. Construction Support--- For museum display cases of table design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel structure.Lower steel table structure to support upper part is made of mild/low carbon steel in powder-coating finish.Each drawer unit is mounted on the dedicated heavy-duty sliding system.Levelling adjusters and master rollers at the feet get table display case more convenient and practical. Inner Invironment--- As inert materials are comprehensively applied for making museum display cases of table design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for dressing baseboard is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For table display cases with drawer or storage cabinets, usually fabric-dressed ZF-MDF baseboards work as shelving platform.

Opening Solution--- Opening solution for glass hood is swing opening for partial access and pull & push opening for individual drawer units.For easy and secure operation,swing opening is usually additionally supported by 2 gas strut from sides.For easy operation,each drawer can fix a handle. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum table display cases of drawer design are discretely and invisibly equipped with passive microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards. Lighting System--- Lighting system for museum display cases of table design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.For some special illumination in glass hood,particular lighting system like swan neck lighting devices can be bespoke on request.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level. Lock System--- As the lock system with the highest level of security,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of glass hood and individual drawer unit so the integral security of museum display cases is enhanced

Bevel Desk Display Cases from Wangda Showcases

Bevel / tilt museum table display case come with a slope glass hood.The slope glass hood is seated on an open or closed plinth.Frameless glass hood with glass and solid panels supplies a transparent,front & top viewed and protective showcasing environment.It is applicable to the exhibition of small,medium and flat artifacts such as coins,medals,manuscript,calligraphy and so on. Glass Panels--- Glass hood for museum display cases of table design is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.Frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 is usually proposed. Construction Support--- For this museum display case of table design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel structure.Solid 25mm thick ZF-MDF and 2mm thick steel panels are used as structural backboard even side boards.Lower steel table structure to support upper part is made of mild/low carbon steel in powder-coating finish.The usual design of table support can be 2 x steel cheek plates or or closed and lockable plinth.Levelling adjusters and master rollers at the feet get table display case more convenient and practical. Inner Invironment--- As inert materials are comprehensively applied for making museum display cases of table design,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF for dressing baseboard,structural backboard even side boards are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For tabletop bevel museum display cases, usually fabric-dressed ZF-MDF baseboards or powder-coated steel decks work as shelving platform.

Opening Solution--- As needed by actual exhibits and exhibition,opening solution can be specified as swing opening for partial access or elevating opening for full access.For easy and secure operation,swing opening is usually additionally supported by 2 gas strut from sides and elevating opening is electrically driven.For larger table display cases,remote control opening can be optionally configurated. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of table design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber can realize more precise control on desired humidity and temperature in museum display cases. Lighting System--- Lighting system for museum display cases of table design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.For some special illumination,particular lighting system like swan neck lighting devices can be bespoke on request.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level. Lock System--- As the lock system with the highest security level,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

All Glass Hood Tabletop Display Cases from Wangda Showcases

All-glass hood tabletop display cases comes in a full-vision glass hood that is seated on a stable steel table structure.Frameless glass hood with glazed panels for all exposed sides and security construction to supply a transparent,fully-viewed and protective showcasing environment.The simplicity style of table display case is applicable to the exhibition of small,flat,narrow and long artifacts such as documents,coins,medals,manuscript,calligraphy and so on. Glass Panels--- Glass hood for museum display cases of table design is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass hood elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option. Construction Support--- For museum display cases of table design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel structure.Lower steel table structure to support upper part is made of mild/low carbon steel in powder-coating finish.The usual design of table support can be 2 x steel cheek plates or 4x square steel legs or closed and lockable chamber.Levelling adjusters and master rollers at the feet get table display case more convenient and practical. Inner Invironment--- As inert materials are comprehensively applied for making museum display cases of table design,no any chemical reaction will take place inside internal environment.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF baseboard panel is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For tabletop museum display cases, usually fabric-dressed ZF-MDF baseboards or powder-coated steel decks work as shelving platform.

Opeing Solution---  As needed by actual exhibits and exhibition,opening solution can be specified as swing opening for partial access or elevating opening for full access.For easy and secure operation,swing opening is usually additionally supported by 2 gas strut from sides and elevating opening is electrically driven.For larger table display cases,remote control opening can be optionally configurated. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created.. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of table design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber can realize more precise control on desired humidity and temperature in museum display cases. Lighting System--- Lighting system for museum display cases of table design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.For some special illumination,particular lighting system like swan neck lighting devices can be bespoke on request.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level. Lock System--- As the lock system with the highest security level,Abloy cam locks or push locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

Full Hight Display Cases from Wangda Showcases

Full-hight/full vision freestanding museum display cases are characterized by lower base and glass going from the floor to top.Secured to the lower base,the glass trunk is made by 4 glazed panels which supplies a transparent,4 sides-viewed and protective showcasing environment.Full-height glass freestanding cases are ideal to showcase artifacts in 360° and is applicable to the exhibition of small,medium and light artifacts. Glass Panels--- The glass trunk of freestanding museum display cases is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 for larger display cases. Construction Support--- For full-height glass freestanding museum display cases,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower base that is made by mild/low carbon steel in powder-coating finish. Inner Invironment--- As inert materials are comprehensively applied for making museum display cases of freestanding design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for dressing baseboard is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For full height freestanding museum display cases,there are usually 2 shelving systems for options,i.e.fabric-dressed ZF-MDF baseboards or powder-coated steel decks to work as shelving platform,or come with a pending glass shelving system with tempered/toughened glass shelves.For glass shelving system,the glass shevles are movable so as to freely adjust the shelving height.

Opening Solution--- Swing opening by simple hinge mechanism for max.90° access. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of freestanding design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards. Lighting System--- For full-height galss freestanding museum display cases,the special lighting device like LED panel or fibre optic light head comes to the top glass panel or just external lighting system to supply illumination.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level Lock System--- As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

4 Glazed Sides Freestanding Display Cases from Wangda Showcases

4 Glass sides freestanding museum display cases with top light chamber stand on the floor independently.Secured to closed plinth,the glass hood by 4 glazed panels supplies a transparent,round-viewed and protective showcasing environment.The freestanding display case with top light chamber is ideal to showcase artifacts from 4 directions and is applicable to the exhibition of small,medium and also larger artifacts. Glass Panels--- The glass trunk of freestanding museum display cases with top light chamber is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 for larger display cases. Construction Support--- For museum display cases of freestanding design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel plinth that is made by mild/low carbon steel in powder-coating finish.The lockable plinth can be applied for housing necessary accessories such as electrical parts and electronic devices.2 mm steel panels to clad the plinth to increase the security. Inner Invironment--- As inert materials are comprehensively applied for making museum display cases of freestanding design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for dressing baseboard is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For freestanding museum display cases,there are usually 2 shelving systems for options,i.e.fabric-dressed ZF-MDF baseboards or powder-coated steel decks to work as shelving platform,or come with a pending glass shelving system with tempered/toughened glass shelves.For glass shelving system,the glass shevles are movable so as to freely adjust the shelving height.

Opening Solution--- Opening solution can be swing opening for max.90° access or pull & slide opening for full access.For easy and secure operation,remote control system can be configurated. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of freestanding design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber of pedestal can realize more precise control on desired humidity and temperature in museum display cases. Lighting System--- For freestanding museum display cases with top light chamber,the lighting system is usually integrated in the light chamber with protective light diffuser that can filter UV and isolate heat accumulation from emitted lighting.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level. Lock System--- As the lock system with the highest secuirty level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

Glass Top / 5 Glazed Glass Freestanding Display Cases from Wangda Showcases

Museum display cases of glass top/5 glass sides freestanding design stand on the floor independently.Secured to closed pedestal,the glass hood by 5 glazed panels supplies a transparent,fully-viewed and protective showcasing environment.The freestanding display case of glass top is ideal to showcase artifacts from all direction and is applicable to the exhibition of small,medium and also larger artifacts. Glass Panels--- The glass hood for glass top freestanding display cases is made by 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make glass top freestanding display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 for larger display cases. Construction Support--- For museum display cases of freestanding design,the metal profile to receive glass panels is made by dedicated powder-coated aluminum extrusions and then is tightly secured to lower steel pedestal that is made by mild/low carbon steel in powder-coating finish.The lockable pedestal can be applied for housing necessary accessories such as electrical parts and electronic devices. Inner Invironment--- As inert materials are comprehensively applied for making museum display cases of freestanding design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for dressing baseboard is fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For freesanding museum display cases,there are usually 2 shelving systems for options,i.e.fabric-dressed ZF-MDF baseboards or powder-coated steel decks to work as shelving platform,or come with a pending glass shelving system with tempered/toughened glass shelves.For glass shelving system,the glass shevles are movable so as to freely adjust the shelving height.

Opening Solution--- Opening solution for glass hood can be swing opening for max.90° access or electric-driven elevating opening for full access.For easy and secure operation,remote control system can be configurated. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of freestanding design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower chamber of pedestal can realize more precise control on desired humidity and temperature in museum display cases. Lighting System--- Lighting system for museum display cases of glass top freestanding design should be always protective and far from heat accumulation and UV or IR radiation so LED bar or fibre optic lighting system is usually proposed.Or,external lighting can be applied due to clear glass top.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level. Lock System--- As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

Wall Mounted / Wall Hung Display Cases from Wangda Showcases

With the wall construction as support,wall mounted/wall hung museum display cases usually means a frameless glass case to be fully hung to the surface of wall or false wall through the dedicated cantilever systems.This design can ideally meet the exhibition space of museums.Full support from the wall immensely ensures the security and stability of the wall mounted museum display cases.Usually come in solid back,glass sides and glass front.Solid back can be applied as shelving system or to secure additional shelving system. It is applicable to single way exhibition of small and medium artifacts. Glass Panels--- The glass panels for wall hung museum display cases adopt 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option. Construction Support --- The wall structure supplies enough support for security and stability for recessed wall museum display cases.The metal profiles made by dedicated powder-coated aluminum extrusions receive glass panels and secured to the solid steel structure that is constructed by mild/low carbon steel in powder-coating finish.Solid backboard also acts as additional structural support to enhance the stability of display cases. Inner Environment--- As inert materials are comprehensively applied for making museum display cases of wall-mounted design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for structural backboard,side boards and dressing baseboard are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For wall mounted museum display cases,there are usually 3 shelving systems for options,i.e.fabric-dressed ZF-MDF baseboards or powder-coated steel decks to work as shelving platform,or backboard of display cases works to hang exhibits,or come with a glass shelving system with tempered/toughened glass shelves.For glass shelving system,the glass shevles are movable so as to freely adjust the shelving height.

Opening Solution--- For small size of wall hung display cases,usually the hinge mechanism is installed on the top for up-down swing opening solution or the mechanism is installed on sides for left-right swing opening solution.For larger size of wall hung display cases, pull & slide opening solution is applied. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of wall-mounted design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards. Lighting System--- Wall hung museum display cases usually come in LED or fibre optic lighting system.As needed by exhibits,the top light chamber can be for option.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level. Lock System--- As the lock system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.

Built-in / Recessed Wall Display Cases from Wangda Showcases

With glass panels just for front,built-in / recessed wall museum display cases are built in wall or false wall.This design ingeniously makes enough use of wall construction to extremely save more exhibtion room for museums.Full support from the wall fabric immensely increases the security and stability of the wall display cases.Recessed wall display cases come in solid back,solid sides and glass front.Solid back can be applied as shelving system or to secure additional shelving system. It is applicable to single way exhibition of medium and large artifacts. Glass Panels--- The glass panels for recessed wall museum display cases adopt 3-ply laminated safety glass which meets BS EN356 Part 4A,the international authoritative criteria of safety glass.Optiwhite glass with low iron content or ultra clear glass with low reflective coat ensures high light transmittance with no vision distortion.All glass frameless construction and invisible glass bonding bring no any sight obstruction on display.UV bonding adhesive under advanced UV bonding technology and dedicated cure agent make display cases elegant but solid.Specifications of glass like 4+0.76+4,5+0.76+5,4+1.52+4,5+1.52+5 for usual option and 6+1.52+6 or even 8+1.52+8 for larger display cases. Construction Support --- The wall fabric supplies enough support for security and stability for recessed wall museum display cases.The metal profiles made by dedicated powder-coated aluminum extrusions receive glass panels and secured to the solid steel structure that is constructed by mild/low carbon steel in powder-coating finish.Solid backboard also acts as additional structural support to enhance the stability of display cases. Inner Environment--- As inert materials are comprehensively applied for making museum display cases of wall design,no any chemical reaction will take place inside internal environment of cases.All the adhesive,sealant and cure agent for bonding are completely neutral and non-hazardous,and that ZF-MDF panel for structural backboard,side boards and dressing baseboard are fully sealed by aluminized polyethylene film then veneered with environmental fabric,so internally,no destructive pollutional VOCs will bring any damage on displayed exhibits including sensitive artifacts. Shelving System--- For wall museum display cases,there are usually 3 shelving systems for options,i.e.fabric-dressed ZF-MDF baseboards or powder-coated steel decks to work as shelving platform,or backboard of display cases works to hang exhibits,or come with a glass shelving system with tempered/toughened glass shelves.For glass shelving system,the glass shevles are movable so as to freely adjust the shelving height.

Opening Solution--- Under the support of the dedicated pull & slide opening mechanism,the glass panel door(s) can move to left or right optionally for half or full access.No noise comes up when the opening mechanism works.For easy operation,touch-screen remote control device can be configurated. Air Tightness--- Consistency of structure by dedicated extrusions,precise fabrication on glass and metal parts work together with seal extrusion,seal sealant and silicon seal strip to create a well airtightness at a minimal air exchange rate not more than 0.2 every 24 hours,consequently,a dust-proof internal display space is created. Microclimate Control--- To reach a relatively constant humidity and temperature for perfect conservation on displayed exhibits,museum display cases of built-in design are discretely and invisibly equipped with passive or active microclimate control systems.Passive microclimate control system is usually realized by silicon gel/artsorb/prosorb inside the dedicated metal tray under baseboards.Electronic active microclimate control system inside lower plinth can achieve more precise control on required humidity and temperature in display space of museum display cases. Lighting System--- Recessed wall museum display cases usually come in three options of lighting system like fluroscent,LED or fibre optic light.The fluorescent lighting system is traditionally integrated in the top discrete light chamber with light diffuser to filter UV,IR and isolate heat accumulation from lighting and also to achieve a dimmable illumination.Fiber optic lighting systems have extremely low heat and UV output so will not damage delicate items prone to degradation by light and can ideally create theatric display effect by combination of different end light fittings and dimmable light level. Lock System--- As the locking system with the highest security level,Abloy cam locks can excellently and perfectly resist any physical attacks so as to loyally safeguard the access of museum display cases so the integral security of museum display cases is enhanced.